[sword-devel] SWORD with Cygwin [was: SWORDWeb for Windows]

Troy A. Griffitts scribe at crosswire.org
Sun Dec 18 17:42:59 MST 2005 

David,
	You might try editing usrinst.sh to not build with ICU, for now.  Then 
restart the build process from ./usrinst.sh

	Thanks for staying with this.

		-Troy.



David Forslund wrote:
> Fixing this made a big difference, but now when compiling 
> utilfuns/utilstr.cpp,  it can't find various unicode/*.h include files.  
> I can't tell what package is supposed to have them.
> 
> thanks,
> 
> Dave
> Chris Little wrote:
> 
>> Actually, it's just a problem in the installed CygWin environment. The 
>> default Cygwin environment isn't a full development environment, so 
>> you need to install libtool (and maybe other packages) using the 
>> CygWin installer.
>>
>> (I'm not sure that there aren't OTHER problems with a CygWin build, 
>> but this will fix the problem identified below.)
>>
>> --Chris
>>
>> Troy A. Griffitts wrote:
>>
>>> David,
>>>     Thank you for your efforts.  This is a basic SWORD on Cygwin 
>>> compile problem, for which I have no expertise.  Hoping someone with 
>>> experience can comment.
>>>
>>>     -Troy.
>>>
>>>
>>>
>>> David Forslund wrote:
>>>
>>>> I tried building it under cygwin  and get the following errors:
>>>>
>>>>
>>>> C:\projects\sword>sh autogen.sh
>>>> *** Sword build system generation
>>>> *** Recreating libtool
>>>> libtoolize
>>>> autogen.sh: line 8: libtoolize: command not found
>>>> *** Recreating aclocal.m4
>>>> aclocal
>>>> m4/cppunit.m4:4: warning: underquoted definition of AM_PATH_CPPUNIT
>>>>  run info '(automake)Extending aclocal'
>>>>  or see 
>>>> http://sources.redhat.com/automake/automake.html#Extending-aclocal
>>>> /usr/share/aclocal/gtk-2.0.m4:8: warning: underquoted definition of 
>>>> AM_PATH_GTK_2_0
>>>> *** Recreating configure
>>>> configure.ac:26: error: possibly undefined macro: AC_LIBTOOL_WIN32_DLL
>>>>      If this token and others are legitimate, please use 
>>>> m4_pattern_allow.
>>>>      See the Autoconf documentation.
>>>> configure.ac:27: error: possibly undefined macro: AC_PROG_LIBTOOL
>>>> *** Recreating the Makefile.in files
>>>> configure.ac: installing `./install-sh'
>>>> configure.ac: installing `./missing'
>>>> examples/cmdline/Makefile.am: installing `./depcomp'
>>>> lib/Makefile.am:16: Libtool library used but `LIBTOOL' is undefined
>>>> lib/Makefile.am:16:
>>>> lib/Makefile.am:16: The usual way to define `LIBTOOL' is to add 
>>>> `AC_PROG_LIBTOOL'
>>>> lib/Makefile.am:16: to `configure.ac' and run `aclocal' and 
>>>> `autoconf' again.
>>>> configure.ac:13: installing `./config.guess'
>>>> configure.ac:13: installing `./config.sub'
>>>>
>>>> C:\projects\sword>sh usrinst.sh
>>>> checking build system type... i686-pc-cygwin
>>>> checking host system type... i686-pc-cygwin
>>>> checking target system type... i686-pc-cygwin
>>>> checking for a BSD-compatible install... /usr/bin/install -c
>>>> checking whether build environment is sane... yes
>>>> checking for gawk... gawk
>>>> checking whether make sets $(MAKE)... yes
>>>> checking for gcc... gcc
>>>> checking for C compiler default output file name... a.exe
>>>> checking whether the C compiler works... yes
>>>> checking whether we are cross compiling... no
>>>> checking for suffix of executables... .exe
>>>> checking for suffix of object files... o
>>>> checking whether we are using the GNU C compiler... yes
>>>> checking whether gcc accepts -g... yes
>>>> checking for gcc option to accept ANSI C... none needed
>>>> checking for style of include used by make... GNU
>>>> checking dependency style of gcc... gcc3
>>>> checking for g++... g++
>>>> checking whether we are using the GNU C++ compiler... yes
>>>> checking whether g++ accepts -g... yes
>>>> checking dependency style of g++... gcc3
>>>> checking for a BSD-compatible install... /usr/bin/install -c
>>>> ./configure: line 3491: AC_LIBTOOL_WIN32_DLL: command not found
>>>> ./configure: line 3492: AC_PROG_LIBTOOL: command not found
>>>> checking whether byte ordering is bigendian... no
>>>> checking whether to enable maintainer-specific portions of 
>>>> Makefiles... no
>>>> checking for compress in -lz... yes
>>>> checking for cppunit-config... no
>>>> checking for Cppunit - version >= 1.8.0... checking for 
>>>> pkg-config... no
>>>> configure: WARNING: *** pkg-config not found. See 
>>>> http://www.freedesktop.org/software/pkgconfig/
>>>> configure: WARNING: not using pkg-config
>>>> ./configure: line 4129: no: command not found
>>>> configure: WARNING: *** pkg-config too old; version 0.14 or better 
>>>> required.
>>>> configure: WARNING: not using pkg-config
>>>> checking for pkgdata... /usr/sbin/pkgdata
>>>> checking for genccode... /usr/sbin/genccode
>>>> checking for gencmn... /usr/sbin/gencmn
>>>> checking for genrb... /usr/sbin/genrb
>>>> checking for icu-config... no
>>>> *** The icu-config script installed by icu could not be found
>>>> *** continuing anyway and assuming 2.1 or earlier
>>>> checking for curl-config... no
>>>> *** The curl-config script installed by curl could not be found
>>>> *** compiling without libcurl support
>>>> lucene found - lucene searching options available
>>>> configure: creating ./config.status
>>>> config.status: creating Makefile
>>>> config.status: error: cannot find input file: Makefile.in
>>>>
>>>>
>>>>
>>>> Configured to NOT write a global /etc/sword.conf on 'make install'.
>>>> If this is the first time you've installed sword, be sure to run
>>>> 'make install_config' if you would like a basic configuration installed
>>>>
>>>> Next you might try something like:
>>>>
>>>> make
>>>> su
>>>> make install
>>>> (and optionally)
>>>> make install_config
>>>> make register
>>>>
>>>>
>>>>
>>>>
>>>> C:\projects\sword>make
>>>> make: *** No targets specified and no makefile found.  Stop.
>>>>
>>>> C:\projects\sword>ls
>>>> AUTHORS       README.svn      config.status  install-sh  src
>>>> CODINGSTYLE   aclocal.m4      config.sub     lib         stamp-h.in
>>>> COPYING       arminst.sh      configure      locales.d   sword.bmp
>>>> ChangeLog     autogen.sh      configure.ac   m4          sword.kdevprj
>>>> INSTALL       autom4te.cache  depcomp        missing     sword.pc.in
>>>> LICENSE       bindings        distignore     obj         sword.spec.in
>>>> Makefile.am   buildtest.cpp   doc            olb         tests
>>>> Makefile.cvs  config.guess    examples       pix         usrinst.sh
>>>> NEWS          config.h.in     icu            samples     utilities
>>>> README        config.log      include        scripts
>>>>
>>>> C:\projects\sword>\cygwin\bin\make
>>>> make: *** No targets specified and no makefile found.  Stop.
>>>>
>>>> C:\projects\sword>make install_config
>>>> make: *** No rule to make target `install_config'.  Stop.
>>>>
>>>> C:\projects\sword>
>>>>
>>>> Troy A. Griffitts wrote:
>>>>
>>>>> If anyone is available and willing, we have a request to verify 
>>>>> SWORDWeb does, indeed, run on a Windows box.
>>>>>
>>>>> The instructions for install are available at:
>>>>>
>>>>>     http://crosswire.org/swordweb/
>>>>>
>>>>>
>>>>> Post a note if you are willing to give it a shot.
>>>>>
>>>>>         -Troy.
>>>>>
>>>>> _______________________________________________
>>>>> sword-devel mailing list: sword-devel at crosswire.org
>>>>> http://www.crosswire.org/mailman/listinfo/sword-devel
>>>>> Instructions to unsubscribe/change your settings at above page
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> sword-devel mailing list: sword-devel at crosswire.org
>>>> http://www.crosswire.org/mailman/listinfo/sword-devel
>>>> Instructions to unsubscribe/change your settings at above page
>>>
>>>
>>>
>>> _______________________________________________
>>> sword-devel mailing list: sword-devel at crosswire.org
>>> http://www.crosswire.org/mailman/listinfo/sword-devel
>>> Instructions to unsubscribe/change your settings at above page
>>
>>
>> _______________________________________________
>> sword-devel mailing list: sword-devel at crosswire.org
>> http://www.crosswire.org/mailman/listinfo/sword-devel
>> Instructions to unsubscribe/change your settings at above page
>>
>>
>>
> 
> 
> _______________________________________________
> sword-devel mailing list: sword-devel at crosswire.org
> http://www.crosswire.org/mailman/listinfo/sword-devel
> Instructions to unsubscribe/change your settings at above page

More information about the sword-devel mailing list