[sword-devel] SWORD with Cygwin [was: SWORDWeb for Windows]

David Forslund forslund at mail.com
Sun Dec 18 17:16:32 MST 2005 

Fixing this made a big difference, but now when compiling 
utilfuns/utilstr.cpp,  it can't find various unicode/*.h include files.  
I can't tell what package is supposed to have them.

thanks,

Dave
Chris Little wrote:
> Actually, it's just a problem in the installed CygWin environment. The 
> default Cygwin environment isn't a full development environment, so 
> you need to install libtool (and maybe other packages) using the 
> CygWin installer.
>
> (I'm not sure that there aren't OTHER problems with a CygWin build, 
> but this will fix the problem identified below.)
>
> --Chris
>
> Troy A. Griffitts wrote:
>> David,
>>     Thank you for your efforts.  This is a basic SWORD on Cygwin 
>> compile problem, for which I have no expertise.  Hoping someone with 
>> experience can comment.
>>
>>     -Troy.
>>
>>
>>
>> David Forslund wrote:
>>
>>> I tried building it under cygwin  and get the following errors:
>>>
>>>
>>> C:\projects\sword>sh autogen.sh
>>> *** Sword build system generation
>>> *** Recreating libtool
>>> libtoolize
>>> autogen.sh: line 8: libtoolize: command not found
>>> *** Recreating aclocal.m4
>>> aclocal
>>> m4/cppunit.m4:4: warning: underquoted definition of AM_PATH_CPPUNIT
>>>  run info '(automake)Extending aclocal'
>>>  or see 
>>> http://sources.redhat.com/automake/automake.html#Extending-aclocal
>>> /usr/share/aclocal/gtk-2.0.m4:8: warning: underquoted definition of 
>>> AM_PATH_GTK_2_0
>>> *** Recreating configure
>>> configure.ac:26: error: possibly undefined macro: AC_LIBTOOL_WIN32_DLL
>>>      If this token and others are legitimate, please use 
>>> m4_pattern_allow.
>>>      See the Autoconf documentation.
>>> configure.ac:27: error: possibly undefined macro: AC_PROG_LIBTOOL
>>> *** Recreating the Makefile.in files
>>> configure.ac: installing `./install-sh'
>>> configure.ac: installing `./missing'
>>> examples/cmdline/Makefile.am: installing `./depcomp'
>>> lib/Makefile.am:16: Libtool library used but `LIBTOOL' is undefined
>>> lib/Makefile.am:16:
>>> lib/Makefile.am:16: The usual way to define `LIBTOOL' is to add 
>>> `AC_PROG_LIBTOOL'
>>> lib/Makefile.am:16: to `configure.ac' and run `aclocal' and 
>>> `autoconf' again.
>>> configure.ac:13: installing `./config.guess'
>>> configure.ac:13: installing `./config.sub'
>>>
>>> C:\projects\sword>sh usrinst.sh
>>> checking build system type... i686-pc-cygwin
>>> checking host system type... i686-pc-cygwin
>>> checking target system type... i686-pc-cygwin
>>> checking for a BSD-compatible install... /usr/bin/install -c
>>> checking whether build environment is sane... yes
>>> checking for gawk... gawk
>>> checking whether make sets $(MAKE)... yes
>>> checking for gcc... gcc
>>> checking for C compiler default output file name... a.exe
>>> checking whether the C compiler works... yes
>>> checking whether we are cross compiling... no
>>> checking for suffix of executables... .exe
>>> checking for suffix of object files... o
>>> checking whether we are using the GNU C compiler... yes
>>> checking whether gcc accepts -g... yes
>>> checking for gcc option to accept ANSI C... none needed
>>> checking for style of include used by make... GNU
>>> checking dependency style of gcc... gcc3
>>> checking for g++... g++
>>> checking whether we are using the GNU C++ compiler... yes
>>> checking whether g++ accepts -g... yes
>>> checking dependency style of g++... gcc3
>>> checking for a BSD-compatible install... /usr/bin/install -c
>>> ./configure: line 3491: AC_LIBTOOL_WIN32_DLL: command not found
>>> ./configure: line 3492: AC_PROG_LIBTOOL: command not found
>>> checking whether byte ordering is bigendian... no
>>> checking whether to enable maintainer-specific portions of 
>>> Makefiles... no
>>> checking for compress in -lz... yes
>>> checking for cppunit-config... no
>>> checking for Cppunit - version >= 1.8.0... checking for 
>>> pkg-config... no
>>> configure: WARNING: *** pkg-config not found. See 
>>> http://www.freedesktop.org/software/pkgconfig/
>>> configure: WARNING: not using pkg-config
>>> ./configure: line 4129: no: command not found
>>> configure: WARNING: *** pkg-config too old; version 0.14 or better 
>>> required.
>>> configure: WARNING: not using pkg-config
>>> checking for pkgdata... /usr/sbin/pkgdata
>>> checking for genccode... /usr/sbin/genccode
>>> checking for gencmn... /usr/sbin/gencmn
>>> checking for genrb... /usr/sbin/genrb
>>> checking for icu-config... no
>>> *** The icu-config script installed by icu could not be found
>>> *** continuing anyway and assuming 2.1 or earlier
>>> checking for curl-config... no
>>> *** The curl-config script installed by curl could not be found
>>> *** compiling without libcurl support
>>> lucene found - lucene searching options available
>>> configure: creating ./config.status
>>> config.status: creating Makefile
>>> config.status: error: cannot find input file: Makefile.in
>>>
>>>
>>>
>>> Configured to NOT write a global /etc/sword.conf on 'make install'.
>>> If this is the first time you've installed sword, be sure to run
>>> 'make install_config' if you would like a basic configuration installed
>>>
>>> Next you might try something like:
>>>
>>> make
>>> su
>>> make install
>>> (and optionally)
>>> make install_config
>>> make register
>>>
>>>
>>>
>>>
>>> C:\projects\sword>make
>>> make: *** No targets specified and no makefile found.  Stop.
>>>
>>> C:\projects\sword>ls
>>> AUTHORS       README.svn      config.status  install-sh  src
>>> CODINGSTYLE   aclocal.m4      config.sub     lib         stamp-h.in
>>> COPYING       arminst.sh      configure      locales.d   sword.bmp
>>> ChangeLog     autogen.sh      configure.ac   m4          sword.kdevprj
>>> INSTALL       autom4te.cache  depcomp        missing     sword.pc.in
>>> LICENSE       bindings        distignore     obj         sword.spec.in
>>> Makefile.am   buildtest.cpp   doc            olb         tests
>>> Makefile.cvs  config.guess    examples       pix         usrinst.sh
>>> NEWS          config.h.in     icu            samples     utilities
>>> README        config.log      include        scripts
>>>
>>> C:\projects\sword>\cygwin\bin\make
>>> make: *** No targets specified and no makefile found.  Stop.
>>>
>>> C:\projects\sword>make install_config
>>> make: *** No rule to make target `install_config'.  Stop.
>>>
>>> C:\projects\sword>
>>>
>>> Troy A. Griffitts wrote:
>>>
>>>> If anyone is available and willing, we have a request to verify 
>>>> SWORDWeb does, indeed, run on a Windows box.
>>>>
>>>> The instructions for install are available at:
>>>>
>>>>     http://crosswire.org/swordweb/
>>>>
>>>>
>>>> Post a note if you are willing to give it a shot.
>>>>
>>>>         -Troy.
>>>>
>>>> _______________________________________________
>>>> sword-devel mailing list: sword-devel at crosswire.org
>>>> http://www.crosswire.org/mailman/listinfo/sword-devel
>>>> Instructions to unsubscribe/change your settings at above page
>>>>
>>>>
>>>>
>>>
>>>
>>> _______________________________________________
>>> sword-devel mailing list: sword-devel at crosswire.org
>>> http://www.crosswire.org/mailman/listinfo/sword-devel
>>> Instructions to unsubscribe/change your settings at above page
>>
>>
>> _______________________________________________
>> sword-devel mailing list: sword-devel at crosswire.org
>> http://www.crosswire.org/mailman/listinfo/sword-devel
>> Instructions to unsubscribe/change your settings at above page
>
> _______________________________________________
> sword-devel mailing list: sword-devel at crosswire.org
> http://www.crosswire.org/mailman/listinfo/sword-devel
> Instructions to unsubscribe/change your settings at above page
>
>
>

More information about the sword-devel mailing list