[sword-devel] A question about Generic book modules
David Haslam
dfhdfh at protonmail.com
Wed Jun 3 09:33:25 EDT 2020
My Sword path is not in the part of the system that Windows guards like that!
It's where any normal Windows user with the same name would have it.
C:\Users\David\AppData\Roaming\Sword
For my own convenience, I have subst s: <sword_path> as one of the several substitute drives made during startup.
I never had such a weird problem with other module creation tools.
Best regards,
David
Aside (especially for Tom): Eggshell™ is Sean Connery's favourite spreadsheet program. 😉
Sent with ProtonMail Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Wednesday, 3 June 2020 14:22, Tom Sullivan <info at beforgiven.info> wrote:
> David:
>
> I gave up on Microslop and Windoze years ago. So I am way out of date,
> but even several years ago, Windoze would, for security reasons, restore
> changed system files and delete foreign files unless certain settings
> were made. C:\, was protected then, and maybe now.
>
> I think you got hit by Windoze is smarter than you behavior. Try cd to
> your "my documents" directory and repeat. If you see a 3 files, then
> you have a Windoze problem. You should be able to break your script into
> simpler steps and fix things.
>
> Hope this helps.
>
> Tom
>
> Tom Sullivan
> info at BeForgiven.INFO
> FAX: 815-301-2835
>
> -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>
> On 6/3/20 9:10 AM, David Haslam wrote:
>
> > I followed Timmy's sensible suggestion, which was something I'd pondered
> > myself already.
> > Now here's what I observed.
> > Files lbc1646.dat and lbc1646.idx appeared /momentarily/ in the
> > Make folder, but simply vanished when lbc1646.bdt finished being
> > created.
> > Does anyone have a plausible explanation for such bizarre behaviour?
> > Were they moved to some unknown destination or simply deleted?
> > Best regards,
> > David
> > Sent with ProtonMail https://protonmail.com Secure Email.
> > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > On Wednesday, 3 June 2020 13:34, Timmy tim.bze at gmail.com wrote:
> >
> > > Hi David,
> > > As Tom also mentioned, I run the command on linux, in your case, like
> > > this:
> > > ..\utils64\xml2gbs -fO ..\Import\OSIS\OSIS-lbc1646.fix.xml lbc1646
> > > Windows also can have issues if there are spaces in the path. I don't
> > > know if your full path has any spaces, but you might want to try
> > > running from c:\ directly, or some path that has no spaces.
> > >
> > > After command runs, the 3 files are in current directory. If it does
> > > not work on Windows then there might be wins problem, not sure.
> > > *
> > >
> > > ---------------------------------------------------------------------------------------------------------------------------------------
> > >
> > > Timmy Braun*
> > > On Wed, Jun 3, 2020 at 6:23 AM David Haslam <dfhdfh at protonmail.com
> > > mailto:dfhdfh at protonmail.com> wrote:
> > >
> > > Thanks Tom,
> > >
> > > The module name is [LBC1646] (as specified in my .conf file), and
> > > that points to the right module path.
> > >
> > > This was the command in my CMD file, all of which are stored in a
> > > folder called Make under my Sword path.
> > >
> > > ..\\utils64\\xml2gbs -fO ..\\Import\\OSIS\\OSIS-lbc1646.fix.xml
> > > ..\\modules\\genbook\\rawgenbook\\lbc1646\\lbc1646 2>..\\Log\\error.log
> > >
> > > NB. utils64 is a symbolic link to where I installed the Windows
> > > edition of Sword utilities (x64 version).
> > > Likewise, the Import folder is one I created some years ago. The
> > > Log folder is similar.
> > >
> > > This command created the file called lbc1646.bdt in the right
> > > place, but did not create the other two files.
> > > And, yes, I've looked for them elsewhere too!
> > >
> > > So am I doing something wrong or is there a deficiency in the
> > > Windows edition of xml2gbs ?
> > >
> > >
> > > Best regards,
> > >
> > > David
> > >
> > > Sent with ProtonMail Secure Email.
> > >
> > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > > On Wednesday, 3 June 2020 12:57, Tom Sullivan
> > > <info at beforgiven.info <mailto:info at beforgiven.info>> wrote:
> > >
> > > > David:
> > > >
> > > > You will have cd to a temporary directory xml2gbs as xml2gbs
> > > just puts
> > > > its output in the current directory, then copy files from that
> > > temporary
> > > > directory to your .sword library as below, along with your .conf
> > > file.
> > > >
> > > > All three of those files are created simultaneously.
> > > >
> > > > After you copy from the temporary directory, you should have a .conf
> > > > file in .sword/mods.d, (done manually), and then from your temporary
> > > > directory: in .sword/modules/genbook/rawgenbook/somemodulename
> > > the three
> > > > files *.bdt, *.dat, *.idx.
> > > > An images directory should be there also if there are images.
> > > >
> > > > This is Linux. I do not know what Windoze will do.
> > > >
> > > > Hope this helps.
> > > >
> > > > Tom
> > > >
> > > > Tom Sullivan
> > > > info at BeForgiven.INFO
> > > > FAX: 815-301-2835
> > > > ---------------------> It's apparent that the .dat and .idx
> > > files are
> > > > needed for the module to function aright.
> > > >
> > > > > When I tried to open the new module in Xiphos, nothing was
> > > displayed.
> > > > > So please would someone explain how I can make these two files
> > > so that my new module will work correctly.
> > > > > Best regards,
> > > > > David
> > > > > Sent with ProtonMail Secure Email.
> > > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > > > > On Wednesday, 3 June 2020 11:18, David Haslam
> > > dfhdfh at protonmail.com <mailto:dfhdfh at protonmail.com> wrote:
> > > > >
> > > > > > I have just used xml2gbs to create a Generic book module for
> > > the first time.
> > > > > > It created a module file with extension .bdt in the right
> > > location.
> > > > > > All Generic book modules I've installed from CrossWire also
> > > have two more files in the module folder.
> > > > > > One with extension .dat and one with .idx
> > > > > > I have not found anything on our wiki that describes what
> > > software tool is used to create these two files, nor an
> > > explanation of what they are for.
> > > > > > Please would someone enlighten me.
> > > > > > Best regards,
> > > > > > David
> > > > > > Sent with ProtonMail Secure Email.
> > > > >
> > > > > sword-devel mailing list: sword-devel at crosswire.org
> > > <mailto:sword-devel at crosswire.org>
> > > > > http://www.crosswire.org/mailman/listinfo/sword-devel
> > > > > Instructions to unsubscribe/change your settings at above page
> > > > >
> > > > > This email has been scanned by the Symantec Email
> > > Security.cloud service.
> > > > > For more information please visit http://www.symanteccloud.com
> > > >
> > > > sword-devel mailing list: sword-devel at crosswire.org
> > > <mailto:sword-devel at crosswire.org>
> > > > http://www.crosswire.org/mailman/listinfo/sword-devel
> > > > Instructions to unsubscribe/change your settings at above page
> > >
> > >
> > > _______________________________________________
> > > sword-devel mailing list: sword-devel at crosswire.org
> > > <mailto:sword-devel at crosswire.org>
> > > http://www.crosswire.org/mailman/listinfo/sword-devel
> > > Instructions to unsubscribe/change your settings at above page
> > >
> >
> > This email has been scanned by the Symantec Email Security.cloud service.
> > For more information please visit http://www.symanteccloud.com
> >
> > sword-devel mailing list: sword-devel at crosswire.org
> > http://www.crosswire.org/mailman/listinfo/sword-devel
> > Instructions to unsubscribe/change your settings at above page
>
> sword-devel mailing list: sword-devel at crosswire.org
> http://www.crosswire.org/mailman/listinfo/sword-devel
> Instructions to unsubscribe/change your settings at above page
More information about the sword-devel
mailing list