[sword-devel] sword updates
Troy A. Griffitts
scribe at crosswire.org
Sun Sep 16 17:13:28 MST 2007
It looks like everyone having troubles is still seeing a double '/' in
their output. I thought I had eliminated all of these. I will try to
spend some time soon to try to figure out where these are coming in and
get rid of them. Everyone's output has been very helpful. Thank you
all for spending the time.
-Troy.
PS. If anyone has time to look into before me. Please have a go. I
have exams on Monday and Wednesday this week.
Karl Kleinpaste wrote:
> "Troy A. Griffitts" <scribe at crosswire.org> writes:
>> I've added some debug to the CURL libs. Attached is the run from my FC6
>> box. Could I get some people who can make things fail to run latest svn
>> again and send their output. The difference between our outputs should
>> tell us something now, hopefully.
>
> svn-up'd to -r2079 and rebuilt.
>
>
>
> ------------------------------------------------------------------------
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> -=+* WARNING *+=- -=+* WARNING *+=-
>
>
> Although Install Manager provides a convenient way for installing
> and upgrading SWORD components, it also uses a systematic method
> for accessing sites which gives packet sniffers a target to lock
> into for singling out users.
>
>
> IF YOU LIVE IN A PERSECUTED COUNTRY AND DO NOT WISH TO RISK DETECTION,
> YOU SHOULD *NOT* USE INSTALL MANAGER'S REMOTE SOURCE FEATURES.
>
>
> if you understand this and are willing to enable remote source features
> then type yes at the prompt
>
> enable? [no]
>
> Initialized basic config file at [/home/karl/.sword/InstallMgr/InstallMgr.conf]
> with remote source features ENABLED
>
> ***** using CURLOPT_FTP_USE_EPRT
> ***** About to perform curl easy action.
> ***** destPath: /home/karl/.sword/InstallMgr/ftp.crosswire.org/mods.d.tar.gz
> ***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw/mods.d.tar.gz
> * About to connect() to ftp.crosswire.org port 21 (#0)
> * Trying 64.140.154.250... * connected
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> < 220 (vsFTPd 2.0.5)
>> USER ftp
> < 331 Please specify the password.
>> PASS installmgr at user.com
> < 230 Login successful.
>> PWD
> < 257 "/"
> * Entry path is '/'
>> CWD pub
> < 250 Directory successfully changed.
>> CWD sword
> < 250 Directory successfully changed.
>> CWD raw
> < 250 Directory successfully changed.
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||20898|)
> * Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 20898
>> TYPE I
> < 200 Switching to Binary mode.
>> SIZE mods.d.tar.gz
> < 213 82960
>> RETR mods.d.tar.gz
> < 150 Opening BINARY mode data connection for mods.d.tar.gz (82960 bytes).
> * Maxdownload = -1
> * Getting file with size: 82960
> * Remembering we are in dir pub/sword/raw/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> ***** Finished performing curl easy action.
>> QUIT
> < 221 Goodbye.
> * Closing connection #0
>
> Remote Source Refreshed
>
> ***** using CURLOPT_FTP_USE_EPRT
> ***** About to perform curl easy action.
> ***** destPath: dirlist
> ***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//
> * About to connect() to ftp.crosswire.org port 21 (#0)
> * Trying 64.140.154.250... * connected
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> < 220 (vsFTPd 2.0.5)
>> USER ftp
> < 331 Please specify the password.
>> PASS installmgr at user.com
> < 230 Login successful.
>> PWD
> < 257 "/"
> * Entry path is '/'
>> CWD pub
> < 250 Directory successfully changed.
>> CWD sword
> < 250 Directory successfully changed.
>> CWD raw
> < 250 Directory successfully changed.
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||41195|)
> * Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 41195
>> TYPE A
> < 200 Switching to ASCII mode.
>> LIST
> < 150 Here comes the directory listing.
> * Maxdownload = -1
> * Remembering we are in dir pub/sword/raw//
> < 226 Directory send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> ***** Finished performing curl easy action.
> ***** using CURLOPT_FTP_USE_EPRT
> ***** About to perform curl easy action.
> ***** destPath: dirlist
> ***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
>> CWD /
> < 250 Directory successfully changed.
>> CWD pub
> < 250 Directory successfully changed.
>> CWD sword
> < 250 Directory successfully changed.
>> CWD raw
> < 250 Directory successfully changed.
>> CWD dead
> < 250 Directory successfully changed.
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||21412|)
> * Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 21412
>> LIST
> < 150 Here comes the directory listing.
> * Maxdownload = -1
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 Directory send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> ***** Finished performing curl easy action.
> ***** using CURLOPT_FTP_USE_EPRT
> ***** About to perform curl easy action.
> ***** destPath: /home/karl/.sword/modules/texts/ztext/kjv/dead/dra.conf
> ***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/dra.conf
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||8658|)
> * Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 8658
>> TYPE I
> < 200 Switching to Binary mode.
>> SIZE dra.conf
> < 213 272
>> RETR dra.conf
> < 150 Opening BINARY mode data connection for dra.conf (272 bytes).
> * Maxdownload = -1
> * Getting file with size: 272
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> ***** Finished performing curl easy action.
> ***** using CURLOPT_FTP_USE_EPRT
> ***** About to perform curl easy action.
> ***** destPath: /home/karl/.sword/modules/texts/ztext/kjv/dead/hitchcock.conf
> ***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/hitchcock.conf
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||20778|)
> * Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 20778
>> SIZE hitchcock.conf
> < 213 938
>> RETR hitchcock.conf
> < 150 Opening BINARY mode data connection for hitchcock.conf (938 bytes).
> * Maxdownload = -1
> * Getting file with size: 938
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> ***** Finished performing curl easy action.
> ***** using CURLOPT_FTP_USE_EPRT
> ***** About to perform curl easy action.
> ***** destPath: /home/karl/.sword/modules/texts/ztext/kjv/dead/kekchi.conf
> ***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/kekchi.conf
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||5511|)
> * Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 5511
>> SIZE kekchi.conf
> < 213 282
>> RETR kekchi.conf
> < 150 Opening BINARY mode data connection for kekchi.conf (282 bytes).
> * Maxdownload = -1
> * Getting file with size: 282
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> ***** Finished performing curl easy action.
> ***** using CURLOPT_FTP_USE_EPRT
> ***** About to perform curl easy action.
> ***** destPath: /home/karl/.sword/modules/texts/ztext/kjv/dead/lightfoot.conf
> ***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/lightfoot.conf
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||10221|)
> * Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 10221
>> SIZE lightfoot.conf
> < 213 447
>> RETR lightfoot.conf
> < 150 Opening BINARY mode data connection for lightfoot.conf (447 bytes).
> * Maxdownload = -1
> * Getting file with size: 447
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> ***** Finished performing curl easy action.
> ***** using CURLOPT_FTP_USE_EPRT
> ***** About to perform curl easy action.
> ***** destPath: /home/karl/.sword/modules/texts/ztext/kjv/dead/luther.conf
> ***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/luther.conf
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||49865|)
> * Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 49865
>> SIZE luther.conf
> < 213 364
>> RETR luther.conf
> < 150 Opening BINARY mode data connection for luther.conf (364 bytes).
> * Maxdownload = -1
> * Getting file with size: 364
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> ***** Finished performing curl easy action.
> ***** using CURLOPT_FTP_USE_EPRT
> ***** About to perform curl easy action.
> ***** destPath: /home/karl/.sword/modules/texts/ztext/kjv/dead/nave.conf
> ***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/nave.conf
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||51877|)
> * Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 51877
>> SIZE nave.conf
> < 213 1284
>> RETR nave.conf
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> sword-devel mailing list: sword-devel at crosswire.org
>> http://www.crosswire.org/mailman/listinfo/sword-devel
>> Instructions to unsubscribe/change your settings at above page
More information about the sword-devel
mailing list