[sword-devel] sword updates
Joachim Ansorg
nospam+sword-devel at joachim-ansorg.de
Sun Sep 16 06:49:44 MST 2007
Hi,
I just updated to latest svn and attached the out.txt file.
To me it's looks like mods.tar.gz is downloaded at first but later installmgr
gets mixed up. Look at the destination path:
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
*****
destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/mods.d/fden_da.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//mods.d/fden_da.conf
Joachim
> I've added some debug to the CURL libs. Attached is the run from my FC6
> box. Could I get some people who can make things fail to run latest svn
> again and send their output. The difference between our outputs should
> tell us something now, hopefully.
>
> -Troy.
--
<>< Re: deemed
www.bibletime.info
-------------- next part --------------
-=+* WARNING *+=- -=+* WARNING *+=-
Although Install Manager provides a convenient way for installing
and upgrading SWORD components, it also uses a systematic method
for accessing sites which gives packet sniffers a target to lock
into for singling out users.
IF YOU LIVE IN A PERSECUTED COUNTRY AND DO NOT WISH TO RISK DETECTION,
YOU SHOULD *NOT* USE INSTALL MANAGER'S REMOTE SOURCE FEATURES.
if you understand this and are willing to enable remote source features
then type yes at the prompt
enable? [no]
Initialized basic config file at [/home/jansorg/.sword/InstallMgr/InstallMgr.conf]
with remote source features ENABLED
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/InstallMgr/ftp.crosswire.org/mods.d.tar.gz
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw/mods.d.tar.gz
* About to connect() to ftp.crosswire.org port 21 (#0)
* Trying 64.140.154.250... * connected
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
< 220 (vsFTPd 2.0.5)
> USER ftp
< 331 Please specify the password.
> PASS installmgr at user.com
< 230 Login successful.
> PWD
< 257 "/"
* Entry path is '/'
> CWD pub
< 250 Directory successfully changed.
> CWD sword
< 250 Directory successfully changed.
> CWD raw
< 250 Directory successfully changed.
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||55920|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 55920
> TYPE I
< 200 Switching to Binary mode.
> SIZE mods.d.tar.gz
< 213 82960
> RETR mods.d.tar.gz
< 150 Opening BINARY mode data connection for mods.d.tar.gz (82960 bytes).
* Maxdownload = -1
* Getting file with size: 82960
* Remembering we are in dir pub/sword/raw/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
> QUIT
< 221 Goodbye.
* Closing connection #0
Remote Source Refreshed
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: dirlist
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//
* About to connect() to ftp.crosswire.org port 21 (#0)
* Trying 64.140.154.250... * connected
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
< 220 (vsFTPd 2.0.5)
> USER ftp
< 331 Please specify the password.
> PASS installmgr at user.com
< 230 Login successful.
> PWD
< 257 "/"
* Entry path is '/'
> CWD pub
< 250 Directory successfully changed.
> CWD sword
< 250 Directory successfully changed.
> CWD raw
< 250 Directory successfully changed.
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||40733|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 40733
> TYPE A
< 200 Switching to ASCII mode.
> LIST
< 150 Here comes the directory listing.
* Maxdownload = -1
* Remembering we are in dir pub/sword/raw//
< 226 Directory send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: dirlist
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> CWD /
< 250 Directory successfully changed.
> CWD pub
< 250 Directory successfully changed.
> CWD sword
< 250 Directory successfully changed.
> CWD raw
< 250 Directory successfully changed.
> CWD dead
< 250 Directory successfully changed.
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||20080|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 20080
> LIST
< 150 Here comes the directory listing.
* Maxdownload = -1
* Remembering we are in dir pub/sword/raw//dead/
< 226 Directory send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/dead/dra.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/dra.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||22254|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 22254
> TYPE I
< 200 Switching to Binary mode.
> SIZE dra.conf
< 213 272
> RETR dra.conf
< 150 Opening BINARY mode data connection for dra.conf (272 bytes).
* Maxdownload = -1
* Getting file with size: 272
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/dead/hitchcock.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/hitchcock.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||47761|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 47761
> SIZE hitchcock.conf
< 213 938
> RETR hitchcock.conf
< 150 Opening BINARY mode data connection for hitchcock.conf (938 bytes).
* Maxdownload = -1
* Getting file with size: 938
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/dead/kekchi.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/kekchi.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||30673|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 30673
> SIZE kekchi.conf
< 213 282
> RETR kekchi.conf
< 150 Opening BINARY mode data connection for kekchi.conf (282 bytes).
* Maxdownload = -1
* Getting file with size: 282
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/dead/lightfoot.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/lightfoot.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||27567|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 27567
> SIZE lightfoot.conf
< 213 447
> RETR lightfoot.conf
< 150 Opening BINARY mode data connection for lightfoot.conf (447 bytes).
* Maxdownload = -1
* Getting file with size: 447
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/dead/luther.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/luther.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||15809|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 15809
> SIZE luther.conf
< 213 364
> RETR luther.conf
< 150 Opening BINARY mode data connection for luther.conf (364 bytes).
* Maxdownload = -1
* Getting file with size: 364
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/dead/nave.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/nave.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||47082|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 47082
> SIZE nave.conf
< 213 1284
> RETR nave.conf
< 150 Opening BINARY mode data connection for nave.conf (1284 bytes).
* Maxdownload = -1
* Getting file with size: 1284
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/dead/peshitta.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/peshitta.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||36412|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 36412
> SIZE peshitta.conf
< 213 535
> RETR peshitta.conf
< 150 Opening BINARY mode data connection for peshitta.conf (535 bytes).
* Maxdownload = -1
* Getting file with size: 535
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/dead/robinson.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/robinson.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||57841|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 57841
> SIZE robinson.conf
< 213 589
> RETR robinson.conf
< 150 Opening BINARY mode data connection for robinson.conf (589 bytes).
* Maxdownload = -1
* Getting file with size: 589
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/dead/smith.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/smith.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||7274|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 7274
> SIZE smith.conf
< 213 497
> RETR smith.conf
< 150 Opening BINARY mode data connection for smith.conf (497 bytes).
* Maxdownload = -1
* Getting file with size: 497
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/dead/spurious.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/spurious.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||11913|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 11913
> SIZE spurious.conf
< 213 445
> RETR spurious.conf
< 150 Opening BINARY mode data connection for spurious.conf (445 bytes).
* Maxdownload = -1
* Getting file with size: 445
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/dead/strongsgreek.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/strongsgreek.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||64356|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 64356
> SIZE strongsgreek.conf
< 213 625
> RETR strongsgreek.conf
< 150 Opening BINARY mode data connection for strongsgreek.conf (625 bytes).
* Maxdownload = -1
* Getting file with size: 625
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/dead/strongshebrew.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/strongshebrew.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||35274|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 35274
> SIZE strongshebrew.conf
< 213 627
> RETR strongshebrew.conf
< 150 Opening BINARY mode data connection for strongshebrew.conf (627 bytes).
* Maxdownload = -1
* Getting file with size: 627
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/dead/swe1917.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/swe1917.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||14163|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 14163
> SIZE swe1917.conf
< 213 811
> RETR swe1917.conf
< 150 Opening BINARY mode data connection for swe1917.conf (811 bytes).
* Maxdownload = -1
* Getting file with size: 811
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/dead/tokpisin.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/tokpisin.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||36593|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 36593
> SIZE tokpisin.conf
< 213 336
> RETR tokpisin.conf
< 150 Opening BINARY mode data connection for tokpisin.conf (336 bytes).
* Maxdownload = -1
* Getting file with size: 336
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/dead/tr.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/tr.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||50914|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 50914
> SIZE tr.conf
< 213 664
> RETR tr.conf
< 150 Opening BINARY mode data connection for tr.conf (664 bytes).
* Maxdownload = -1
* Getting file with size: 664
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/dead/webster.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//dead/webster.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||27052|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 27052
> SIZE webster.conf
< 213 1922
> RETR webster.conf
< 150 Opening BINARY mode data connection for webster.conf (1922 bytes).
* Maxdownload = -1
* Getting file with size: 1922
* Remembering we are in dir pub/sword/raw//dead/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: dirlist
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> CWD /
< 250 Directory successfully changed.
> CWD pub
< 250 Directory successfully changed.
> CWD sword
< 250 Directory successfully changed.
> CWD raw
< 250 Directory successfully changed.
> CWD locales.d
< 250 Directory successfully changed.
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||12689|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 12689
> TYPE A
< 200 Switching to ASCII mode.
> LIST
< 150 Here comes the directory listing.
* Maxdownload = -1
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 Directory send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/abbr.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/abbr.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||43964|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 43964
> TYPE I
< 200 Switching to Binary mode.
> SIZE abbr.conf
< 213 3252
> RETR abbr.conf
< 150 Opening BINARY mode data connection for abbr.conf (3252 bytes).
* Maxdownload = -1
* Getting file with size: 3252
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/cs.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/cs.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||46797|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 46797
> SIZE cs.conf
< 213 5404
> RETR cs.conf
< 150 Opening BINARY mode data connection for cs.conf (5404 bytes).
* Maxdownload = -1
* Getting file with size: 5404
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/da.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/da.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||20229|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 20229
> SIZE da.conf
< 213 7884
> RETR da.conf
< 150 Opening BINARY mode data connection for da.conf (7884 bytes).
* Maxdownload = -1
* Getting file with size: 7884
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/de.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/de.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||6316|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 6316
> SIZE de.conf
< 213 4712
> RETR de.conf
< 150 Opening BINARY mode data connection for de.conf (4712 bytes).
* Maxdownload = -1
* Getting file with size: 4712
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/de_abbrev.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/de_abbrev.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||57899|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 57899
> SIZE de_abbrev.conf
< 213 3929
> RETR de_abbrev.conf
< 150 Opening BINARY mode data connection for de_abbrev.conf (3929 bytes).
* Maxdownload = -1
* Getting file with size: 3929
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/en_GB.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/en_GB.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||34672|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 34672
> SIZE en_GB.conf
< 213 3186
> RETR en_GB.conf
< 150 Opening BINARY mode data connection for en_GB.conf (3186 bytes).
* Maxdownload = -1
* Getting file with size: 3186
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/es.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/es.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||45325|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 45325
> SIZE es.conf
< 213 4657
> RETR es.conf
< 150 Opening BINARY mode data connection for es.conf (4657 bytes).
* Maxdownload = -1
* Getting file with size: 4657
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/et.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/et.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||42348|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 42348
> SIZE et.conf
< 213 5810
> RETR et.conf
< 150 Opening BINARY mode data connection for et.conf (5810 bytes).
* Maxdownload = -1
* Getting file with size: 5810
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/et_abbr.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/et_abbr.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||13561|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 13561
> SIZE et_abbr.conf
< 213 5355
> RETR et_abbr.conf
< 150 Opening BINARY mode data connection for et_abbr.conf (5355 bytes).
* Maxdownload = -1
* Getting file with size: 5355
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/fi.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/fi.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||47256|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 47256
> SIZE fi.conf
< 213 6633
> RETR fi.conf
< 150 Opening BINARY mode data connection for fi.conf (6633 bytes).
* Maxdownload = -1
* Getting file with size: 6633
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/fr.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/fr.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||33285|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 33285
> SIZE fr.conf
< 213 6945
> RETR fr.conf
< 150 Opening BINARY mode data connection for fr.conf (6945 bytes).
* Maxdownload = -1
* Getting file with size: 6945
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/fr_FR.ISO-8859-1.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/fr_FR.ISO-8859-1.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||62347|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 62347
> SIZE fr_FR.ISO-8859-1.conf
< 213 6951
> RETR fr_FR.ISO-8859-1.conf
< 150 Opening BINARY mode data connection for fr_FR.ISO-8859-1.conf (6951 bytes).
* Maxdownload = -1
* Getting file with size: 6951
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/id.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/id.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||6078|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 6078
> SIZE id.conf
< 213 4951
> RETR id.conf
< 150 Opening BINARY mode data connection for id.conf (4951 bytes).
* Maxdownload = -1
* Getting file with size: 4951
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/it.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/it.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||12088|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 12088
> SIZE it.conf
< 213 7487
> RETR it.conf
< 150 Opening BINARY mode data connection for it.conf (7487 bytes).
* Maxdownload = -1
* Getting file with size: 7487
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/la.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/la.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||56795|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 56795
> SIZE la.conf
< 213 4336
> RETR la.conf
< 150 Opening BINARY mode data connection for la.conf (4336 bytes).
* Maxdownload = -1
* Getting file with size: 4336
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/nl.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/nl.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||63106|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 63106
> SIZE nl.conf
< 213 2918
> RETR nl.conf
< 150 Opening BINARY mode data connection for nl.conf (2918 bytes).
* Maxdownload = -1
* Getting file with size: 2918
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/no.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/no.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||15369|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 15369
> SIZE no.conf
< 213 5693
> RETR no.conf
< 150 Opening BINARY mode data connection for no.conf (5693 bytes).
* Maxdownload = -1
* Getting file with size: 5693
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/olb.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/olb.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||60942|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 60942
> SIZE olb.conf
< 213 3453
> RETR olb.conf
< 150 Opening BINARY mode data connection for olb.conf (3453 bytes).
* Maxdownload = -1
* Getting file with size: 3453
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/pl.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/pl.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||21334|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 21334
> SIZE pl.conf
< 213 4172
> RETR pl.conf
< 150 Opening BINARY mode data connection for pl.conf (4172 bytes).
* Maxdownload = -1
* Getting file with size: 4172
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/pt.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/pt.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||52473|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 52473
> SIZE pt.conf
< 213 4661
> RETR pt.conf
< 150 Opening BINARY mode data connection for pt.conf (4661 bytes).
* Maxdownload = -1
* Getting file with size: 4661
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/pt_BR.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/pt_BR.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||5463|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 5463
> SIZE pt_BR.conf
< 213 4320
> RETR pt_BR.conf
< 150 Opening BINARY mode data connection for pt_BR.conf (4320 bytes).
* Maxdownload = -1
* Getting file with size: 4320
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/ro.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/ro.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||33554|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 33554
> SIZE ro.conf
< 213 4174
> RETR ro.conf
< 150 Opening BINARY mode data connection for ro.conf (4174 bytes).
* Maxdownload = -1
* Getting file with size: 4174
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/ru.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/ru.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||15765|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 15765
> SIZE ru.conf
< 213 5186
> RETR ru.conf
< 150 Opening BINARY mode data connection for ru.conf (5186 bytes).
* Maxdownload = -1
* Getting file with size: 5186
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/ru_RU-cp1251.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/ru_RU-cp1251.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||8968|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 8968
> SIZE ru_RU-cp1251.conf
< 213 7493
> RETR ru_RU-cp1251.conf
< 150 Opening BINARY mode data connection for ru_RU-cp1251.conf (7493 bytes).
* Maxdownload = -1
* Getting file with size: 7493
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/ru_RU-koi8-r.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/ru_RU-koi8-r.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||62555|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 62555
> SIZE ru_RU-koi8-r.conf
< 213 7493
> RETR ru_RU-koi8-r.conf
< 150 Opening BINARY mode data connection for ru_RU-koi8-r.conf (7493 bytes).
* Maxdownload = -1
* Getting file with size: 7493
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/sk.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/sk.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||58704|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 58704
> SIZE sk.conf
< 213 5222
> RETR sk.conf
< 150 Opening BINARY mode data connection for sk.conf (5222 bytes).
* Maxdownload = -1
* Getting file with size: 5222
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/uk_UA-cp1251.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/uk_UA-cp1251.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||17140|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 17140
> SIZE uk_UA-cp1251.conf
< 213 7209
> RETR uk_UA-cp1251.conf
< 150 Opening BINARY mode data connection for uk_UA-cp1251.conf (7209 bytes).
* Maxdownload = -1
* Getting file with size: 7209
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/locales.d/uk_UA-koi8-u.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//locales.d/uk_UA-koi8-u.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||19982|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 19982
> SIZE uk_UA-koi8-u.conf
< 213 7209
> RETR uk_UA-koi8-u.conf
< 150 Opening BINARY mode data connection for uk_UA-koi8-u.conf (7209 bytes).
* Maxdownload = -1
* Getting file with size: 7209
* Remembering we are in dir pub/sword/raw//locales.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: dirlist
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//mods.d/
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> CWD /
< 250 Directory successfully changed.
> CWD pub
< 250 Directory successfully changed.
> CWD sword
< 250 Directory successfully changed.
> CWD raw
< 250 Directory successfully changed.
> CWD mods.d
< 250 Directory successfully changed.
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||52342|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 52342
> TYPE A
< 200 Switching to ASCII mode.
> LIST
< 150 Here comes the directory listing.
* Maxdownload = -1
* Remembering we are in dir pub/sword/raw//mods.d/
< 226 Directory send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/mods.d/2babdict.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//mods.d/2babdict.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||24286|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 24286
> TYPE I
< 200 Switching to Binary mode.
> SIZE 2babdict.conf
< 213 343
> RETR 2babdict.conf
< 150 Opening BINARY mode data connection for 2babdict.conf (343 bytes).
* Maxdownload = -1
* Getting file with size: 343
* Remembering we are in dir pub/sword/raw//mods.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/mods.d/ab.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//mods.d/ab.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||24433|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 24433
> SIZE ab.conf
< 213 828
> RETR ab.conf
< 150 Opening BINARY mode data connection for ab.conf (828 bytes).
* Maxdownload = -1
* Getting file with size: 828
* Remembering we are in dir pub/sword/raw//mods.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/mods.d/abbott.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//mods.d/abbott.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||61254|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 61254
> SIZE abbott.conf
< 213 439
> RETR abbott.conf
< 150 Opening BINARY mode data connection for abbott.conf (439 bytes).
* Maxdownload = -1
* Getting file with size: 439
* Remembering we are in dir pub/sword/raw//mods.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/mods.d/abs_essay_goodsam_swb.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//mods.d/abs_essay_goodsam_swb.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||56319|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 56319
> SIZE abs_essay_goodsam_swb.conf
< 213 600
> RETR abs_essay_goodsam_swb.conf
< 150 Opening BINARY mode data connection for abs_essay_goodsam_swb.conf (600 bytes).
* Maxdownload = -1
* Getting file with size: 600
* Remembering we are in dir pub/sword/raw//mods.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/mods.d/acv.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//mods.d/acv.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||45822|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 45822
> SIZE acv.conf
< 213 659
> RETR acv.conf
< 150 Opening BINARY mode data connection for acv.conf (659 bytes).
* Maxdownload = -1
* Getting file with size: 659
* Remembering we are in dir pub/sword/raw//mods.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/mods.d/afr1953.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//mods.d/afr1953.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||6848|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 6848
> SIZE afr1953.conf
< 213 790
> RETR afr1953.conf
< 150 Opening BINARY mode data connection for afr1953.conf (790 bytes).
* Maxdownload = -1
* Getting file with size: 790
* Remembering we are in dir pub/sword/raw//mods.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/mods.d/akjv.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//mods.d/akjv.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||42843|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 42843
> SIZE akjv.conf
< 213 1268
> RETR akjv.conf
< 150 Opening BINARY mode data connection for akjv.conf (1268 bytes).
* Maxdownload = -1
* Getting file with size: 1268
* Remembering we are in dir pub/sword/raw//mods.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/mods.d/alb.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//mods.d/alb.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||36015|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 36015
> SIZE alb.conf
< 213 462
> RETR alb.conf
< 150 Opening BINARY mode data connection for alb.conf (462 bytes).
* Maxdownload = -1
* Getting file with size: 462
* Remembering we are in dir pub/sword/raw//mods.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/mods.d/aleppo.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//mods.d/aleppo.conf
* Re-using existing connection! (#0) with host ftp.crosswire.org
* Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
* Request has same path as previous transfer
> EPSV
* Connect data stream passively
< 229 Entering Extended Passive Mode (|||45753|)
* Trying 64.140.154.250... * connected
* Connecting to 64.140.154.250 (64.140.154.250) port 45753
> SIZE aleppo.conf
< 213 458
> RETR aleppo.conf
< 150 Opening BINARY mode data connection for aleppo.conf (458 bytes).
* Maxdownload = -1
* Getting file with size: 458
* Remembering we are in dir pub/sword/raw//mods.d/
< 226 File send OK.
* Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/jansorg/.sword/modules/texts/ztext/kjv/mods.d/alt.conf
***** sourceURL: ftp://ftp.crosswire.org/pub/sword/raw//mods.d/alt.conf
More information about the sword-devel
mailing list