[sword-devel] sword updates

Sat Sep 15 16:00:02 MST 2007

I've added some debug to the CURL libs.  Attached is the run from my FC6 
box.  Could I get some people who can make things fail to run latest svn 
again and send their output.  The difference between our outputs should 
tell us something now, hopefully.

	-Troy.

[root at mythtv utilities]# ./installmgr -init > out.txt 2>&1
yes
[root at mythtv utilities]# ./installmgr -r CrossWire >> out.txt 2>&1
[root at mythtv utilities]# ./installmgr -ri CrossWire KJV >> out.txt 2>&1

Joachim Ansorg wrote:
> It's failing on my pc.
> See attached out.txt file. I cancelled the download of the conf files.
> 
> I configured with
>  ./autogen.sh; ./usrinst.sh --enable-tests --without-icu
> 
> I'm running Ubuntu 7.10 (pre release). It's using libcurl 7.16.4.
> 
> Let me know what I should do,
> Joachim
> 
>> Anyone else have a chance to try this on their computer?  I can't seem to
>> get things to fail (FC6 and F7), and Karl has only gotten things to work on
>> Vista(??!)
>>
>> Hope we can figure out how to reproduce the problem (for me, at least) so
>> we can get this squashed.
>>
>> DM, an older copy of Install Manager would not honor the mods.d.tar.gz
>> file. I can think of a few other reasons why you might see downloads from
>> the .conf directory (spiders, etc.).  Anyway, it sounds like it may still
>> be occuring but we need to see it fail in a debugger.
>>
>>   -Troy.
>>
>> [root at mythtv utilities]# ./installmgr -init > out.txt 2>&1
>> yes
>> [root at mythtv utilities]# ./installmgr -r CrossWire >> out.txt 2>&1
>> [root at mythtv utilities]# ./installmgr -ri CrossWire KJV >> out.txt 2>&1
>>
>>
>>
>>
>>
>> _______________________________________________
>> sword-devel mailing list: sword-devel at crosswire.org
>> http://www.crosswire.org/mailman/listinfo/sword-devel
>> Instructions to unsubscribe/change your settings at above page
> 
> 
> 
> 
> ------------------------------------------------------------------------
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
>                 -=+* WARNING *+=- -=+* WARNING *+=-
> 
> 
> Although Install Manager provides a convenient way for installing
> and upgrading SWORD components, it also uses a systematic method
> for accessing sites which gives packet sniffers a target to lock
> into for singling out users. 
> 
> 
> IF YOU LIVE IN A PERSECUTED COUNTRY AND DO NOT WISH TO RISK DETECTION,
> YOU SHOULD *NOT* USE INSTALL MANAGER'S REMOTE SOURCE FEATURES.
> 
> 
> if you understand this and are willing to enable remote source features
> then type yes at the prompt
> 
> enable? [no] 
> 
> Initialized basic config file at [/home/jansorg/.sword/InstallMgr/InstallMgr.conf]
> with remote source features ENABLED
> 
> * About to connect() to ftp.crosswire.org port 21 (#0)
> *   Trying 64.140.154.250... * connected
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> < 220 (vsFTPd 2.0.5)
>> USER ftp
> < 331 Please specify the password.
>> PASS installmgr at user.com
> < 230 Login successful.
>> PWD
> < 257 "/"
> * Entry path is '/'
>> CWD pub
> < 250 Directory successfully changed.
>> CWD sword
> < 250 Directory successfully changed.
>> CWD raw
> < 250 Directory successfully changed.
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||14763|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 14763
>> TYPE I
> < 200 Switching to Binary mode.
>> SIZE mods.d.tar.gz
> < 213 82941
>> RETR mods.d.tar.gz
> < 150 Opening BINARY mode data connection for mods.d.tar.gz (82941 bytes).
> * Maxdownload = -1
> * Getting file with size: 82941
> * Remembering we are in dir pub/sword/raw/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
>> QUIT
> < 221 Goodbye.
> * Closing connection #0
> 
> Remote Source Refreshed
> 
> * About to connect() to ftp.crosswire.org port 21 (#0)
> *   Trying 64.140.154.250... * connected
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> < 220 (vsFTPd 2.0.5)
>> USER ftp
> < 331 Please specify the password.
>> PASS installmgr at user.com
> < 230 Login successful.
>> PWD
> < 257 "/"
> * Entry path is '/'
>> CWD pub
> < 250 Directory successfully changed.
>> CWD sword
> < 250 Directory successfully changed.
>> CWD raw
> < 250 Directory successfully changed.
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||38838|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 38838
>> TYPE A
> < 200 Switching to ASCII mode.
>> LIST
> < 150 Here comes the directory listing.
> * Maxdownload = -1
> * Remembering we are in dir pub/sword/raw//
> < 226 Directory send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
>> CWD /
> < 250 Directory successfully changed.
>> CWD pub
> < 250 Directory successfully changed.
>> CWD sword
> < 250 Directory successfully changed.
>> CWD raw
> < 250 Directory successfully changed.
>> CWD dead
> < 250 Directory successfully changed.
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||19313|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 19313
>> LIST
> < 150 Here comes the directory listing.
> * Maxdownload = -1
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 Directory send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||45857|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 45857
>> TYPE I
> < 200 Switching to Binary mode.
>> SIZE dra.conf
> < 213 272
>> RETR dra.conf
> < 150 Opening BINARY mode data connection for dra.conf (272 bytes).
> * Maxdownload = -1
> * Getting file with size: 272
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||58951|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 58951
>> SIZE hitchcock.conf
> < 213 938
>> RETR hitchcock.conf
> < 150 Opening BINARY mode data connection for hitchcock.conf (938 bytes).
> * Maxdownload = -1
> * Getting file with size: 938
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||23601|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 23601
>> SIZE kekchi.conf
> < 213 282
>> RETR kekchi.conf
> < 150 Opening BINARY mode data connection for kekchi.conf (282 bytes).
> * Maxdownload = -1
> * Getting file with size: 282
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||6821|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 6821
>> SIZE lightfoot.conf
> < 213 447
>> RETR lightfoot.conf
> < 150 Opening BINARY mode data connection for lightfoot.conf (447 bytes).
> * Maxdownload = -1
> * Getting file with size: 447
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||35328|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 35328
>> SIZE luther.conf
> < 213 364
>> RETR luther.conf
> < 150 Opening BINARY mode data connection for luther.conf (364 bytes).
> * Maxdownload = -1
> * Getting file with size: 364
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||47503|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 47503
>> SIZE nave.conf
> < 213 1284
>> RETR nave.conf
> < 150 Opening BINARY mode data connection for nave.conf (1284 bytes).
> * Maxdownload = -1
> * Getting file with size: 1284
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||43928|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 43928
>> SIZE peshitta.conf
> < 213 535
>> RETR peshitta.conf
> < 150 Opening BINARY mode data connection for peshitta.conf (535 bytes).
> * Maxdownload = -1
> * Getting file with size: 535
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||43316|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 43316
>> SIZE robinson.conf
> < 213 589
>> RETR robinson.conf
> < 150 Opening BINARY mode data connection for robinson.conf (589 bytes).
> * Maxdownload = -1
> * Getting file with size: 589
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||63299|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 63299
>> SIZE smith.conf
> < 213 497
>> RETR smith.conf
> < 150 Opening BINARY mode data connection for smith.conf (497 bytes).
> * Maxdownload = -1
> * Getting file with size: 497
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||30992|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 30992
>> SIZE spurious.conf
> < 213 445
>> RETR spurious.conf
> < 150 Opening BINARY mode data connection for spurious.conf (445 bytes).
> * Maxdownload = -1
> * Getting file with size: 445
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||44690|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 44690
>> SIZE strongsgreek.conf
> < 213 625
>> RETR strongsgreek.conf
> < 150 Opening BINARY mode data connection for strongsgreek.conf (625 bytes).
> * Maxdownload = -1
> * Getting file with size: 625
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||51346|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 51346
>> SIZE strongshebrew.conf
> < 213 627
>> RETR strongshebrew.conf
> < 150 Opening BINARY mode data connection for strongshebrew.conf (627 bytes).
> * Maxdownload = -1
> * Getting file with size: 627
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||32496|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 32496
>> SIZE swe1917.conf
> < 213 811
>> RETR swe1917.conf
> < 150 Opening BINARY mode data connection for swe1917.conf (811 bytes).
> * Maxdownload = -1
> * Getting file with size: 811
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||12724|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 12724
>> SIZE tokpisin.conf
> < 213 336
>> RETR tokpisin.conf
> < 150 Opening BINARY mode data connection for tokpisin.conf (336 bytes).
> * Maxdownload = -1
> * Getting file with size: 336
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||21741|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 21741
>> SIZE tr.conf
> < 213 664
>> RETR tr.conf
> < 150 Opening BINARY mode data connection for tr.conf (664 bytes).
> * Maxdownload = -1
> * Getting file with size: 664
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||25844|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 25844
>> SIZE webster.conf
> < 213 1922
>> RETR webster.conf
> < 150 Opening BINARY mode data connection for webster.conf (1922 bytes).
> * Maxdownload = -1
> * Getting file with size: 1922
> * Remembering we are in dir pub/sword/raw//dead/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
>> CWD /
> < 250 Directory successfully changed.
>> CWD pub
> < 250 Directory successfully changed.
>> CWD sword
> < 250 Directory successfully changed.
>> CWD raw
> < 250 Directory successfully changed.
>> CWD locales.d
> < 250 Directory successfully changed.
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||48622|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 48622
>> TYPE A
> < 200 Switching to ASCII mode.
>> LIST
> < 150 Here comes the directory listing.
> * Maxdownload = -1
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 Directory send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||19626|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 19626
>> TYPE I
> < 200 Switching to Binary mode.
>> SIZE abbr.conf
> < 213 3252
>> RETR abbr.conf
> < 150 Opening BINARY mode data connection for abbr.conf (3252 bytes).
> * Maxdownload = -1
> * Getting file with size: 3252
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||26859|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 26859
>> SIZE cs.conf
> < 213 5404
>> RETR cs.conf
> < 150 Opening BINARY mode data connection for cs.conf (5404 bytes).
> * Maxdownload = -1
> * Getting file with size: 5404
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||30220|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 30220
>> SIZE da.conf
> < 213 7884
>> RETR da.conf
> < 150 Opening BINARY mode data connection for da.conf (7884 bytes).
> * Maxdownload = -1
> * Getting file with size: 7884
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||48060|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 48060
>> SIZE de.conf
> < 213 4712
>> RETR de.conf
> < 150 Opening BINARY mode data connection for de.conf (4712 bytes).
> * Maxdownload = -1
> * Getting file with size: 4712
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||51223|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 51223
>> SIZE de_abbrev.conf
> < 213 3929
>> RETR de_abbrev.conf
> < 150 Opening BINARY mode data connection for de_abbrev.conf (3929 bytes).
> * Maxdownload = -1
> * Getting file with size: 3929
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||35833|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 35833
>> SIZE en_GB.conf
> < 213 3186
>> RETR en_GB.conf
> < 150 Opening BINARY mode data connection for en_GB.conf (3186 bytes).
> * Maxdownload = -1
> * Getting file with size: 3186
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||18380|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 18380
>> SIZE es.conf
> < 213 4657
>> RETR es.conf
> < 150 Opening BINARY mode data connection for es.conf (4657 bytes).
> * Maxdownload = -1
> * Getting file with size: 4657
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||58229|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 58229
>> SIZE et.conf
> < 213 5810
>> RETR et.conf
> < 150 Opening BINARY mode data connection for et.conf (5810 bytes).
> * Maxdownload = -1
> * Getting file with size: 5810
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||14718|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 14718
>> SIZE et_abbr.conf
> < 213 5355
>> RETR et_abbr.conf
> < 150 Opening BINARY mode data connection for et_abbr.conf (5355 bytes).
> * Maxdownload = -1
> * Getting file with size: 5355
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||34995|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 34995
>> SIZE fi.conf
> < 213 6633
>> RETR fi.conf
> < 150 Opening BINARY mode data connection for fi.conf (6633 bytes).
> * Maxdownload = -1
> * Getting file with size: 6633
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||30775|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 30775
>> SIZE fr.conf
> < 213 6945
>> RETR fr.conf
> < 150 Opening BINARY mode data connection for fr.conf (6945 bytes).
> * Maxdownload = -1
> * Getting file with size: 6945
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||29728|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 29728
>> SIZE fr_FR.ISO-8859-1.conf
> < 213 6951
>> RETR fr_FR.ISO-8859-1.conf
> < 150 Opening BINARY mode data connection for fr_FR.ISO-8859-1.conf (6951 bytes).
> * Maxdownload = -1
> * Getting file with size: 6951
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||26143|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 26143
>> SIZE id.conf
> < 213 4951
>> RETR id.conf
> < 150 Opening BINARY mode data connection for id.conf (4951 bytes).
> * Maxdownload = -1
> * Getting file with size: 4951
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||28740|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 28740
>> SIZE it.conf
> < 213 7487
>> RETR it.conf
> < 150 Opening BINARY mode data connection for it.conf (7487 bytes).
> * Maxdownload = -1
> * Getting file with size: 7487
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||26391|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 26391
>> SIZE la.conf
> < 213 4336
>> RETR la.conf
> < 150 Opening BINARY mode data connection for la.conf (4336 bytes).
> * Maxdownload = -1
> * Getting file with size: 4336
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||55721|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 55721
>> SIZE nl.conf
> < 213 2918
>> RETR nl.conf
> < 150 Opening BINARY mode data connection for nl.conf (2918 bytes).
> * Maxdownload = -1
> * Getting file with size: 2918
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||57370|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 57370
>> SIZE no.conf
> < 213 5693
>> RETR no.conf
> < 150 Opening BINARY mode data connection for no.conf (5693 bytes).
> * Maxdownload = -1
> * Getting file with size: 5693
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||28868|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 28868
>> SIZE olb.conf
> < 213 3453
>> RETR olb.conf
> < 150 Opening BINARY mode data connection for olb.conf (3453 bytes).
> * Maxdownload = -1
> * Getting file with size: 3453
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||23408|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 23408
>> SIZE pl.conf
> < 213 4172
>> RETR pl.conf
> < 150 Opening BINARY mode data connection for pl.conf (4172 bytes).
> * Maxdownload = -1
> * Getting file with size: 4172
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||12891|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 12891
>> SIZE pt.conf
> < 213 4661
>> RETR pt.conf
> < 150 Opening BINARY mode data connection for pt.conf (4661 bytes).
> * Maxdownload = -1
> * Getting file with size: 4661
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||40250|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 40250
>> SIZE pt_BR.conf
> < 213 4320
>> RETR pt_BR.conf
> < 150 Opening BINARY mode data connection for pt_BR.conf (4320 bytes).
> * Maxdownload = -1
> * Getting file with size: 4320
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||25387|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 25387
>> SIZE ro.conf
> < 213 4174
>> RETR ro.conf
> < 150 Opening BINARY mode data connection for ro.conf (4174 bytes).
> * Maxdownload = -1
> * Getting file with size: 4174
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||46518|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 46518
>> SIZE ru.conf
> < 213 5186
>> RETR ru.conf
> < 150 Opening BINARY mode data connection for ru.conf (5186 bytes).
> * Maxdownload = -1
> * Getting file with size: 5186
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||18062|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 18062
>> SIZE ru_RU-cp1251.conf
> < 213 7493
>> RETR ru_RU-cp1251.conf
> < 150 Opening BINARY mode data connection for ru_RU-cp1251.conf (7493 bytes).
> * Maxdownload = -1
> * Getting file with size: 7493
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||7597|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 7597
>> SIZE ru_RU-koi8-r.conf
> < 213 7493
>> RETR ru_RU-koi8-r.conf
> < 150 Opening BINARY mode data connection for ru_RU-koi8-r.conf (7493 bytes).
> * Maxdownload = -1
> * Getting file with size: 7493
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||49907|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 49907
>> SIZE sk.conf
> < 213 5222
>> RETR sk.conf
> < 150 Opening BINARY mode data connection for sk.conf (5222 bytes).
> * Maxdownload = -1
> * Getting file with size: 5222
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||24867|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 24867
>> SIZE uk_UA-cp1251.conf
> < 213 7209
>> RETR uk_UA-cp1251.conf
> < 150 Opening BINARY mode data connection for uk_UA-cp1251.conf (7209 bytes).
> * Maxdownload = -1
> * Getting file with size: 7209
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||10444|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 10444
>> SIZE uk_UA-koi8-u.conf
> < 213 7209
>> RETR uk_UA-koi8-u.conf
> < 150 Opening BINARY mode data connection for uk_UA-koi8-u.conf (7209 bytes).
> * Maxdownload = -1
> * Getting file with size: 7209
> * Remembering we are in dir pub/sword/raw//locales.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
>> CWD /
> < 250 Directory successfully changed.
>> CWD pub
> < 250 Directory successfully changed.
>> CWD sword
> < 250 Directory successfully changed.
>> CWD raw
> < 250 Directory successfully changed.
>> CWD mods.d
> < 250 Directory successfully changed.
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||34595|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 34595
>> TYPE A
> < 200 Switching to ASCII mode.
>> LIST
> < 150 Here comes the directory listing.
> * Maxdownload = -1
> * Remembering we are in dir pub/sword/raw//mods.d/
> < 226 Directory send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||62078|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 62078
>> TYPE I
> < 200 Switching to Binary mode.
>> SIZE 2babdict.conf
> < 213 343
>> RETR 2babdict.conf
> < 150 Opening BINARY mode data connection for 2babdict.conf (343 bytes).
> * Maxdownload = -1
> * Getting file with size: 343
> * Remembering we are in dir pub/sword/raw//mods.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||23560|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 23560
>> SIZE ab.conf
> < 213 828
>> RETR ab.conf
> < 150 Opening BINARY mode data connection for ab.conf (828 bytes).
> * Maxdownload = -1
> * Getting file with size: 828
> * Remembering we are in dir pub/sword/raw//mods.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||40504|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 40504
>> SIZE abbott.conf
> < 213 439
>> RETR abbott.conf
> < 150 Opening BINARY mode data connection for abbott.conf (439 bytes).
> * Maxdownload = -1
> * Getting file with size: 439
> * Remembering we are in dir pub/sword/raw//mods.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||12067|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 12067
>> SIZE abs_essay_goodsam_swb.conf
> < 213 600
>> RETR abs_essay_goodsam_swb.conf
> < 150 Opening BINARY mode data connection for abs_essay_goodsam_swb.conf (600 bytes).
> * Maxdownload = -1
> * Getting file with size: 600
> * Remembering we are in dir pub/sword/raw//mods.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||51682|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 51682
>> SIZE acv.conf
> < 213 659
>> RETR acv.conf
> < 150 Opening BINARY mode data connection for acv.conf (659 bytes).
> * Maxdownload = -1
> * Getting file with size: 659
> * Remembering we are in dir pub/sword/raw//mods.d/
> < 226 File send OK.
> * Connection #0 to host ftp.crosswire.org left intact
> * Re-using existing connection! (#0) with host ftp.crosswire.org
> * Connected to ftp.crosswire.org (64.140.154.250) port 21 (#0)
> * Request has same path as previous transfer
>> EPSV
> * Connect data stream passively
> < 229 Entering Extended Passive Mode (|||23831|)
> *   Trying 64.140.154.250... * connected
> * Connecting to 64.140.154.250 (64.140.154.250) port 23831
>> SIZE afr1953.conf
> < 213 790
>> RETR afr1953.conf
> < 150 Opening BINARY mode data connection for afr1953.conf (790 bytes).
> * Maxdownload = -1
> * Getting file with size: 790
> * Remembering we are in dir pub/sword/raw//mods.d/
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> sword-devel mailing list: sword-devel at crosswire.org
> http://www.crosswire.org/mailman/listinfo/sword-devel
> Instructions to unsubscribe/change your settings at above page